36
Troubleshooting
36
Troubleshooting
Picture quality problems
Status Solution
Picture is not clear To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
Clean the lens .
Make sure the camera is not in Macro mode if you are more than
27.6 in. (70 cm) from your subject.
Place the camera on a at, steady surface or use a tripod (especially
in high-zoom settings or in low light).
Use a larger picture size.
If you’re manually adjusting the ISO speed, realize that high ISO
setting may cause grainy pictures.
Picture is too dark Reposition the camera for more available light.
Move so that the distance between you and the subject is within the
eective ash range.
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
In Program mode, increase the Exposure Compensation.
Picture is too light Reposition the camera to reduce the amount of available light.
Turn the ash o.
Move so that the distance between you and the subject is within the
eective ash range.
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
In Program mode, decrease the Exposure Compensation.
To Next Page
Loading...
Need help?
General
