10 11
is on, the calibration sheet will be
ejected from the photo print slot
when you print your first photo.
NOTE: Please make sure not to push
the paper in too far or else the paper
could jam or cause misprinting issues.
3. Download the Polaroid Mint application
from the Google Play
™
or Apple
®
App
Store
®
. You will need the app installed
on your phone for the printer to work.
START USING POLAROID MINT!
1. Turn the printer on by pressing the power
button on the side for two (2) seconds.
2. Pair the printer to your phone via
Bluetooth
®
:
a. Access your phone’s Bluetooth
®
settings, usually found under the
general Settings menu.
b. Make sure the printer is on first, and
then allow your phone to scan for
new devices.
c. You will see “Polaroid Mint” appear
in the Bluetooth
®
list. Tap on it to start
pairing.
d. After a couple of seconds, your phone
To Next Page
Loading...
