Page 18
10 Slide the used cleaning sleeve off the spindle.
11 Discard the used cleaning card and used sleeve.
12 Place a new cleaning sleeve on the spindle (1).
13 Remove the protective cover from the sleeve (2).
14 Insert the cleaning roller (with a new cleaning sleeve) into the
printer (3).
15 Replace the ribbon cartridge, close the printer cover, load cards,
and resume printing.
Cleaning tips
• Use the cleaning card as soon as you open the package. The
cleaning solution on the card evaporates after a few minutes.
• Some card features, such as signature panels and magnetic
stripes, can require more frequent cleaning of the printer.
• Printing with a monochrome print ribbon requires more frequent
cleaning. Run a cleaning card if you notice diminished image
quality.
• Clean printer rollers regularly, such as every time you change
the ribbon.
• If you use adhesive-backed cards, use a cleaning card after every
100 cards. The printer might also need additional cleaning.
• See Info Central for more cleaning information.
To Next Page
Loading...
