Polaroid PBT555 User Manual

Control Panel (Back View
）
BATTERY CHARGING
The speaker can be powered by the internal rechargeable battery. When the battery is nearly
exhausted, the red indicator will light and flash, the speaker should be charged as soon as possible.
Connect the unit with USB cable to the power source, and the red indicator will be solid while
charging. When charging is completed, the red indicator will be off.
NOTE:
The battery will charge whether the speaker is switched on or off.
BLUETHOOTH
Pairing and connection
1. Move the Power On/Off to the ON position. Blue light will flash slowly and keep flashing
slowly about 10 seconds the blue indicator will flash quickly and enter pairing mode.
2.Please make sure your Bluetooth connection is activated on your device. Each Bluetooth device
is different so refer to your device’s operating manual if you are unsure how to activate your
Bluetooth connection. During searching, the blue indicator will keep flashing. The Bluetooth
device will scan for the unit and identify it as PBT555. Select PBT555 on your Bluetooth device
to connect.
3.When connected, the speaker will beep and the blue indicator will be solid.
NOTE:
--Make sure of disconnecting the AUX IN cable before Bluetooth connecting.
--If asked for a pass code during paring, enter 0000.
--If unable to connect with the speaker, turn the speaker off and try turning on again and
reconnect.
During playback:
Power On/Of
f
USB charge port
AUX IN jack

Polaroid PBT555 Specifications

General

Brand	Polaroid
Model	PBT555
Category	Speakers
Language	English