NOTE:
There is difculty in focusing the subject when the Auto-focus LED blinks or
the red focus mark appears on the LCD screen. Release the Shutter button,
recompose the scene and press the Shutter button halfway to reset the
focus.
Focus Mark
Shutter button
5. Press the Shutter button completely down to take a picture while
holding the camera steady. A beep will sound (if the Beep sound is
turned on) when a picture is taken.
Auto Focus LED Operation:
When you see this:
Auto Focus LED blinks.
Auto Focus LED remains steady on.
It means this:
There is difculty in focusing the
subject.
The camera focus is locked on the
subject.
To Next Page
Loading...
Need help?
General
