What to do if my Polaroid PDC 330 hanged and all buttons do not work?
If your Polaroid Digital Camera is hanged and all buttons do not work, electrostatic discharge may be the cause. Remove the batteries and disconnect the camera from the computer for 10 seconds, then re-insert the batteries.
What to do if I press the shutter button on my Polaroid Digital Camera and get no response?
If you press the shutter button on your Polaroid Digital Camera and get no response: * The camera may be processing the image. Wait for this process to complete before taking another picture. * The flash may be charging. Wait until the flash finishes charging; two beeps will sound when it’s ready.
What to do if I cannot upload images to the PC from my Polaroid Digital Camera?
If you cannot upload images to the PC from your Polaroid Digital Camera, check that all cable connections are secure.
What to do if my Polaroid PDC 330 LCD displays blank and beeps?
If your Polaroid Digital Camera LCD displays ” ” and you hear a continuous beep, it indicates insufficient power. Replace the batteries to resolve this issue.
Why are my Polaroid PDC 330 Digital Camera flash pictures too dark?
If your Polaroid Digital Camera's flash pictures are too dark, it may be due to insufficient light or being too far from the subject. Try taking the picture in a well-lit room or move closer to the subject.
How to fix Polaroid Digital Camera CD installation wizard?
If your Polaroid Digital Camera CD installation wizard does not work, it could be because the auto installation file is switched off. To resolve this, go to your computer desktop, right-click on 'My Computer,' click 'Properties,' select 'Device Manager,' double-click on 'CD-Rom,' double-click on 'CD-R' (normally the manufacturer’s name), click on 'Setting,' and ensure 'Auto insert notification' is ticked and the 'disconnect' is ticked. If you change the settings, restart your PC.
Why I cannot select Flash on/Flash auto on my Polaroid PDC 330?
If you cannot select Flash on/Flash auto on your Polaroid Digital Camera, the battery may be too low to charge the strobe. Replace the batteries with fresh ones and try again.
How to fix Polaroid PDC 330 Driver installation error?
If you receive an error message when installing the Polaroid Digital Camera PDC 330 Driver, first shut down all other applications and attempt to reinstall the driver. If that doesn't work, check the USB controller in your BIOS to ensure it's activated. If problems persist, contact your national Customer Support representative.
What to do if I cannot run the Polaroid PDC 330 Driver?
If you cannot run the Polaroid PDC 330 Driver, it might be due to a conflict with another camera driver or capture device. If you have another camera installed on your computer, remove it and its driver completely from your system to avoid conflicts.
General| Optical Sensor Size | 1/2.7" |
|---|---|
| Optical Zoom | 3x |
| Focus Adjustment | Automatic |
| Display Type | LCD |
| Connector Type | USB |
| Supported Flash Memory | MultiMediaCard |
| Battery Type | AA |
To Next Page