Removing the SD Card
To remove the SD card, turn off the camera and open the Battery/SD
card door. Gently use your nger to push the SD card inwards and
then release it for the SD card to bounce out of the SD card slot as
illustrated.
IMPORTANT!
• Never insert any other object into the camera’s SD card slot. Doing so
creates the risk of damage to the camera and card.
• Should water or any foreign objects ever get into the card slot, immediately
turn off the camera, remove the batteries and contact your dealer or nearest
service provider.
• Never remove a card from the camera while the camera is powered on.
Doing so can cause the picture or video recording operation to fail, and even
damage the memory card.
To Next Page
Loading...
Need help?
General
