• View Pictures and Video Clips on a TV
Setting TV Output System
The video output signal can be switched (NTSC or PAL) to accommodate
different signal systems. For example, NTSC for U.S.A., Canada,
Taiwan, Japan, etc. and PAL for Europe, Asia (excluding Taiwan), etc.
You can choose the video output system according to the following
steps:
1. Turn on the camera by sliding and holding the Power Switch in the
arrow direction shown near the switch for 2 seconds.
2. Set the camera in Auto mode.
Press
TV Output
On
NTSC PAL
1 Min
TV Output
On
NTSC PAL
1 Min
Press
MENU
,
then
Press
MENU
Press
or
Setup Menu
On
NTSC
Off
Standard
Standard
Standard
This setting is also available in A/S/M, Video and Playback modes.
To Next Page
Loading...
