Removing the SD Card
To remove the SD card, turn off your camera , open the battery/SD card
cover, gently push the SD card inwards and then release it. The SD card
will eject out from the SD card door as illustrated.
Please note that the
icon will appear on the LCD screen, indicating
there is no memory card inserted in the camera.
IMPORTANT!
• Never insert any other objects besides a SD memory card into the camera’s
card slot. Doing so creates the risk of damaging the camera and card slot.
• Make sure that the terminal of the memory card is facing towards the front
of the camera.
• Should water or any foreign objects ever get into the card slot, immediately
turn off the camera, remove the batteries or disconnect the AC adaptor, and
contact your dealer or nearest service provider.
To Next Page
Loading...
