CONTROLS AND CONNECTIONS | 13
5
USB
CYAN
Plug in a USB stick to play media files stored on your USB
storage device (supported file codecs and extensions may
vary).
6
HDMI (ARC)
PURPLE
The ARC (Audio Return Channel) function allows you to send
audio input from an ARC-compliant TV to an ARC-compliant
audio device (e.g. soundbar) without the need for an
additional audio cable connection.
7
Antenna
WHITE Fully extend the FM antenna for a better signal prescription.
Rear Ports on the Soundbar
HDMI (ARC)
To use the ARC function, make sure the soundbar's
TO TV (ARC) socket is connected via HDMI cable
(not included) to the HDMI (ARC) socket of your ARC
compliant TV. Then just use your TV remote control to
adjust the volume output (VOL +/– and MUTE) of the
connected audio device. In the TV settings menu, turn
on the ARC and CEC function (when CEC is turned on,
the sound bar will turn on/off automatically when the
TV is turned on/off).
When you use ARC or Optical connection
to your TV or DVD, the audio output in the
TV or DVD settings menu must be set to
PCM mode (instead of Auto mode, RAW
mode or etc.).
To Next Page
Loading...
Need help?
General
