10 | REMOTE CONTROL
• Push the lift lever forward to lower the tone arm slowly onto the desired position on the record and begin playing the
record.
• When you have finished playing the record, push the lift lever backward to raise the tone arm and gently move it back
to its rest.
• When you have finished playing records, engage the tone arm lock to protect it from accidental movement. Turn the
POWER KNOB to switch the unit OFF. Unplug it from the power supply if you are not going to use it for a while.
• NOTE: If your record stops before the last track finishes, set the AUTO STOP switch to OFF. Your record will now play
to the end, but you will have to stop the turntable rotation manually.
• NOTE: Depending on the record length, AUTO STOP may be enabled before the end of the recording. Do not rely on
AUTO STOP alone to turn off playback.
To avoid damaging the stylus, ensure that the
included stylus guard is in place whenever the
turntable is being installed, moved or cleaned.
To Next Page
Loading...
General