Polaroid ProCam User Manual

Date display
buttons
The date d¡splay
buttons
(Picture
9) on the
control
panel
allowYou
the option
to
imprint a date
and/or
time
(1.8mm
high) in the
upper
left-hand
corner
of
your
Photo-
graphs.
The date
display
buttons
are used
to set
the d¡splay
to
Japanese,
U.S.
or EuroPean
date
mode,
day-hour
mode
or off
mode.
To set
a date
I
Press
MOD
(mode)
repeatedly until
the desired
date
mode is displayed
(Japanese,
U.S. or
European). The
MOD
(mode)
button toggles
through
the
following
options: Japanese
date,
day-hour. off,
U.S. date and
European
date.
An M will be
visible in the date
display to
indicate
which digit
is
the
month.
2
Press
SEL
(select)
to selectthe
year,
month or day
(see
blinking digit).
3
Press SET
repeatedly
(or
hold button)
until
the desired
digit
is
displayed.
Repeat steps
2 and 3 until
the desired
year,
month
and day are
all set.
4
Press SEL
(select)
a fourth
time to
lock
in the date.
Setting
the
time
(in
day-hour-minute
mode)
I Press the
MOD
(mode)
button until
the
day, hour and
minute
mode is dis-
played.
The
first set of diglts
visible in
the
display
is
the
day of the
month,
followed by the
time
in hours and
utes
in European
(or
U.S.
military) ti
(for
example,
13:00
=
1 :00
p.m.).
2
Press SEL
(select)
and
the hours will
blink. Press
SET to toggle
through the
hours. Press SEL
(select)
again
to lock
in the hour and
the
minutes will blink.
3
Press SET to
toggle through
the
mi
Press SEL
(select)
again
to lock
in
the
minutes.
(The
colon
will be blinking).
4
Press SEL
(select)
a
fourth
time
to
lock in the desired
time
(starting
at
the
hours and
minutes displayed
and
zero seconds).
'16
English

Polaroid ProCam Specifications

General

Brand	Polaroid
Model	ProCam
Category	Film Camera
Language	English