ENGLISH
21
Chapter 2 Installing the LCD TV
Press the button on the remote to turn on the LCD TV.
Main
Press the OK button to display the received channel list, then press ▲▼ to select a
channel. Or, use the ▪ (INPUT button) with 0-9 buttons to select digital channel( for
example 9.1)
The digital main channel might include many subchannels (for example 9-1, 9-
2..) that are showing program at the same time.
The Channel Scanning will create a list of receivable channels for the current
input (antenna or cable). You will be required to run Channel Scanning for each
RF input to create a list of available channels from both inputs.
Press the INPUT button on the remote to display the Input List. Use the ▲▼ buttons to
select TV and press the OK button.
Press the MENU button on the remote control to display the Main menu, and use the ◄►
buttons to select the TV.
Status: Scanning..... Cable
Analog Channels: 25
Digital Channels: 0
47%
Channel List
5-2 RF5-2
9-1 KQED-HD
9-2 KOED-SD
8 CCT
12
13
15
TV(CABLE/AIR)
VIDEO1 (SIDE)
VIDEO2 (REAR)
VIDEO3 (S-VIDEO)
VIDEO4 (YPbPr1)
VIDEO5 (YPbPr2)
VIDEO6 (HDMI1)
VIDEO7 (HDMI2)
COMPUTER(VGA)
TV Select Exit
Channel Scan
Tuner Mode Cable
Channel Skip
Favorite List
Time Zone Eastern Time
To Next Page
Loading...
