38
Chapter 3 Using the LCD TV
Press the button to turn the LCD TV on.
Press the MENU button on the remote control to display the Main menu, and use the
◄► buttons to select the TV.
Use the ▲▼buttons to highlight an individual TV option, use the ◄► buttons
changes the setting, and press the MENU exits the menu.
The TV menu includes the following options:
Channel Scan Press the OK button,
the Channel Scanning automatically
creates a list of receivable channels.
Tuner Mode Allows selection between CATV cable and antenna signal sources:
▪ AIR
Choose this setting if you are receiving TV channels with an antenna
(over the air)
▪ Cable
Choose this setting if you are receiving TV channels with a CATV
(cable TV)
Channel Skip Allows addition/removal of channels on the channel list.
Press the OK button to display the Channel Skip menu:
Customizing the TV Settings
TV Select Exit
Channel Scan
Tuner Mode Cable
Channel Skip
Channel Skip Select Exit
2 ABC Analog
3 DISC Analog
4 Analog
5 Analog
6 Analog
7 Analog
8 Analog
9 Analog
10 Analog
To Next Page
Loading...
Need help?
General