Polaroid XS80

POLAROID
XS8
0 U
SE
R GUIDE
Camera
Mountrng
Methods
The
XS80 versatile Mount-Lock Mount1ng System allows you to use your
XS80
in
al
l
types of scenarios.
With the included helmet mounting system it allows you
to
attach
to
all
types
of
helmets
like bike (vented},
motorcycle, ski,
skydive, white water rafting etc. The Mount-Lock system allows
you to easily remove and
remount the camera.
V1s1t
Polaroidaction.com for additional exciting mounting systems.
Secure string
with
quick disconnect -
to
feel
more secure, a
Secure String
is
included.
To
use
1t:
1.
Loop one end
of
the secure strap through the strap
hole
of
the carnera.
You
may use a
pin
to help
thread
it through the
hole.
2.
Attach the other halt to the mount you are using in the strap hole or
to
any other secure place.
3. Clip
both ends when camera is mounted.
Attaching Mount-Lock
to
the
XS80
1.
Fit the screw of the
Mount
-Lock
in
to
the tripod socket
of
the camera.
2.
Turn
the Mount-Lock
screvv until it
is
tightened.
You
can
do it by hand using the
bu
ilt-in triangular wire wrench or
with
the Mount-Lock key; the Mount-Lock
Release Arms should
now
be facing the front
of
the camera.
Installing
the
Helmet Straps into
the
Helmet
Mount
1.
Choose
the suitable strap
to
mount on different types
of
helmets.
For
example, use the short
mount
strap for
b1ke
helmets and the medium rnount strap for motorcycle helmets.
2. Remove the
t'vVO
strap
cl
1ps
from the strap.
3.
There are three vents at
each
side
of
the
Helrr1e
t Mount. Loop the strap through the inner vent (closest
to
the center) fr
om
the bottom.
(Step
1)
4. Loop the strap through the strap clip from the top.
(Step
2)
5.
Loop the strap through
m1ddle
vent from the top. (Step
3)
6. Loop the strap through the outer vent
fron1
the bottom
(Step
4)
7 Tighten the strap and repeat Steps
1-4
on the other side.
11