Polaroid XS80

POLAROID
XS80
USER
GUIDE
10
. Attach the Mount-Lock
and
camera into the
Ball
Joint Socket. Assure that the Mount-Lock
Ball
Joint Nut
is
tightened
securely.
11.
The
ball joint system
allows
you to change the angle
of the camera. Simply loosen the nut, adjust the
camera
angle
and re-tighten the nut.
Tips for Achieving a
Secure
Mounting
When straps are not practical, the adhesive pads
can
be used
to
attach the mount to smooth surfaces
like
a
motorcycle helmet.
And don't
worry
about the adhesive ruining the
helmet;
they're removed quite
easily
when
heat
is
applied
(eg.
a hairdryer).
For
best results,
maximum adhesion
of
the adhesive pad
is
achieved by first
cleaning the
helmet surface
thoroughly where the pad will
be
attached.
Apply
the
pad
firmly
and
allow
it to remain unused overnight. The
dry time
allows
the adhesive to create a stronger bond.
For
ultimate camera support, use the straps and the
3M®
adhesive pads.
13