If preset thresholds were not exceeded, software opens Find Instrument window where
user has to select instrument type
1
. Current software version uses the communication
protocol to work with following instruments: PM1603/04, PM1610, PM1621, PM1300,
РМ1208М, РМ1605, РМ1904А, РМ1703MO-1BT only. Press Find Instrument button to
start searching of the currently connected instrument.
If search results in error, check whether the instrument is properly connected to PC. For
PM1610, PM1605, PM1300 and PM1904A Instruments disconnect the cable for the USB
port, reconnect it again and repeat several times if required so that instrument’s LCD
displays “USB”. For PM1603/04, РМ1208М, PM1621, РМ1703MO-1BT check that IR
link between instrument and adapter is engaged.
Successful search displays the following information on the found instrument:
Instrument serial number;
Firmware version;
Instrument manufactured date.
Press Proceed With This Instrument button, and software opens Assign Instrument
window.
1
By default software indicates the most recently communicated type of the instruments.
____________________________________________________________________________________
© 2016 Software Guide www.polimaster.com
104
To Next Page
Loading...
Need help?
General