Clear History From Instrument (recommended) – flag this check box to activate the
function of immediate automatic history deletion when the history will be read out into the
user card. It is done due to the limited size of the instrument internal memory. This function
is disabled by default;
Turn Off Instrument (available for PM1610 only) – flag this check-box to enable
automatic turn off of the instrument when history was cleared and instrument was detached
from the user. Instrument will switch off automatically when it is disconnected from PC
(miniUSB-USB cable unplugged). This function is disabled by default;
Detach Instrument – flag this check-box to enable function of instrument
detachment from the user when history was read out into the user’s card;
History processing parameters are set for all users in the Program Settings
window (see Program Settings/History Processing tab).
History processing parameters can be edited (flag/unflag options) for
every individual user before the instrument history reading. Use Read
History window.
If any setting is changed for individual user in the Read History window,
then the same setting is automatically activated in the Program Settings
window/History Processing tab) and then remains preset for all
instruments of the database.
____________________________________________________________________________________
© 2016 Software Guide www.polimaster.com
108
To Next Page
Loading...
Need help?
General