Synchronize Time - (flag this check-box if the instrument is used in the measuring
mode for a long period after the last detachment). This function enables synchronization of
instrument and PC internal date and time at the moment of history reading.
Press Read History button to continue. Software will start searching the instrument
currently connected by USB as well as start reading history from the instrument and saving
it into the database (card of the corresponding user). So every user history remains unique
(see Working With History chapter).
If search results in error, press OK button and check whether the instrument is properly
connected to PC:
For the Instruments PM1610, РМ1605, PM1300 and РМ1904А type disconnect the
cable from the instrument’s USB port, reconnect it again and repeat several times if
required so that instrument’s LCD displays “USB”;
____________________________________________________________________________________
© 2016 Software Guide www.polimaster.com
109
To Next Page
Loading...
Need help?
General