Need help?Do you have a question about the Polk Audio RT2000p and is the answer not in the manual?
General| Manufacturer | Polk Audio |
|---|---|
| Sensitivity | 90 dB |
| Nominal Impedance | 8 Ohms |
| Tweeter | 1 |
| Tweeter Size | 1 inch |
| Type | Floorstanding |
| Frequency Response | 20Hz - 25kHz |
| Woofer Size | 6.5 in |
Introductory message from the Chairman and Co-Founder.
Overview of key technologies and design elements of the speakers.
Initial inspection and preparation before connecting the speakers.
Guidelines for positioning speakers to achieve the best sound image.
Instructions for attaching and leveling the speaker feet for stability.
General guidelines for connecting speaker wires to receiver or amplifier.
Method for connecting speaker wire to the binding posts.
Information on connecting the powered speakers to a power source.
How to set voltage and understand the power switch positions.
Recommended connection method for most systems using speaker wire.
Alternative connection using pre-outputs and RCA cables.
Connection for Dolby Digital systems without a dedicated LFE subwoofer.
How to set the subwoofer volume for optimal sound.
Guidance on compatible amplifier power for best performance.
Warnings about amplifier strain and potential speaker damage.
Care instructions for speaker cabinet finishes and grilles.
Troubleshooting steps and contact information for support.
Technical details and features for the RT1000p model.
Technical details and features for the RT2000p model.
To Next Page
