Need help?Do you have a question about the Polk Audio RTI100 and is the answer not in the manual?
Driver Complement| driver size | 62" (16.5 cm) |
|---|---|
| tweeter size | 1" (2.5 cm) |
| subwoofer size | 62" (16.5 cm) |
Frequency and Amplification| overall frequency response | 25 Hz - 27 kHz |
|---|---|
| -3dB limits | 36 Hz - 26 kHz |
| recommended amplification | 20-250 watts/channel |
Impedance and Power Output| impedance | compatible with 8 Ohm outputs |
|---|---|
| subwoofer power output (dynamic) | 35 watts |
| subwoofer power output (FTC) | 80 watts |
Crossover| crossover frequency | 85 Hz, 2.1 kHz |
|---|---|
| crossover slope | 2nd Order HP, 2nd Order LP |
| enclosure type | Driver Sealed/Subwoofer Bandpass PowerPort |
Dimensions and Weight| dimensions | 43 1/4" H x 8 1/4" W x 11 3/8" D (109.9 cm H x 20.9 cm W x 28.9 cm D) |
|---|---|
| base dimensions | 9" W x 12 1/4" D (22.9 cm W x 31.1 cm D) |
| shipping weight | 63 lbs. (29 kg) each |
Place speakers to form an equilateral triangle with the listening position for optimal stereo imaging.
Use carpet spikes for stability on carpet; use rubber feet over spikes for hard floors.
Details Bass Management Settings for Hook Up Option 1: Front = Large.
Details Bass Management Settings for Hook Up Option 2: Front = Large, Sub = No/Yes.
Details Bass Management Settings for Hook Up Option 3: Front = Small, Sub = Yes.
Adjust the built-in subwoofer volume using the rear control knob by ear.
To Next Page
