14
FIG.11 FIG.12FIG.10FIG.9
5. Plug the power supply into an electrical outlet (FIG.12)
6. Remove the TriPollar
®
Preparation Gel from its box.
Important: Before using the device for the first time, it is recommended
to perform a patch test 24 hours prior to initial use. To do so, apply a small
amount of TriPollar
®
Preparation Gel to the inner arm and treat the area
with the TriPollar
®
Stop VX device. Ensure that the skin does not have a
negative reaction to the gel or treatment.
7. Remove the protective cover from the device.
To Next Page
Loading...
