19
RECOMMENDED TREATMENT GUIDELINES
The following treatment guidelines are recommended for using the TriPollar
®
Stop VX device:
• Treating the entire face takes 12-15 minutes. For shorter treatment times
focus on selected areas of concern. Treatment times differ for each person.
• Facial DMA treatment takes approximately 10 minutes.
• For optimal results, use the TriPollar
®
Stop VX device 2-3 times a week for
a period of 6-8 weeks.
• Make sure that you allow at least one day in between treatments on the
same treatment area.
• To maintain long-term results after finishing the full course of treatments,
we recommend that you use your TriPollar
®
Stop VX device 2-4 times a
month or as needed.
• If the orange indicator light and sound indicators still do not appear within
five minutes, or if you do not feel any heating, try moving the device as
slowly as possible without stopping the motion. Slow, circular, constant
movements are more effective than rapid movements. The slower the
movement, the faster the treatment area heats internally.
• If the orange indicator light and sound indicators do not appear after 3–5
minutes, select a higher power level. If the indicators still do not appear
after increasing to the High power setting, try moving the device more
slowly, without stopping the motion.
• If the orange indicator light and sound indicators turn ON immediately or
if you feel excessive heat, select a lower power level.
To Next Page
Loading...
