MT800
-1- -2-
LED Indicator
Solid white light: Printer is in standby mode
Solid green light: Printer is charging – LED
Flashing red light: Ribbon has been depleted
– replace ribbon
-3-
-4-
-5-
Quick Start Guide
Xiamen Hanin Electronic Technology Co., Ltd.
ADD: 5F, 8#, Aide Airport Industrial Park, Huli
District, Xiamen, China
WEB: www.hprt.com
Packing List
Note:
the order.
2) The ribbon module comes preinstalled in
the printer.
Printer Ribbon Module
Appearance and Components
Front
Top Cover
Paper Inlet
LED
Indicator
Opening
Right Cover
Opening
Quick Start Guide
Bluetooth
Indicator
Note:
Inner
Paper Sensor
Paper Feed
Sensor
Right
Paper Feed
Sensor
Right Wing
Paper Sensor
TPH
printer cover upward.
Right Cover Opening
as a guide, and press down to install.
Right Wing
To avoid errors when loading the ribbon,
make sure the arrow d
ribbon and printer align.
NOTE:
Rewind wheel
Rewind wheel
-6-
Rewind wheel
Rewind wheel
straighten out the ribbon.
4. Close the cover. You will hear it click into place.
Loading Ribbon
-7-
(From Mobile Phone)
3 seconds, and then release it when the printer
and the printer is ready.
Paper Inlet
Note:
-8-
3. Download “H-Print” APP: Scan the QR
code below to download “H-Print” APP.
4. Connect with the printer:
1) Turn on Bluetooth on the mobile phone,
mobile app, not through the Bluetooth
devices list.
Note:
the on screen steps in the app and was not required
in step 2.
2) Open the APP and select “Device
the device via APP”, and select “MT800-XXXX”
Bluetooth address)
5. Print:
1) Select
2) Press the print icon in the top right to start
-9-
℃~35℃
Storage Temperature: -5℃~45℃
NOTE:
USB Cable
To Next Page
Need help?
General