POLTI CIMEX ERADICATOR

Other manuals for POLTI CIMEX ERADICATOR

Usage Instructions12 pages

Manual15 pages

Questions and Answers

K
Katie AllenJul 26, 2025
Why is my POLTI Vacuum Cleaner not producing steam?
- T
  Timothy FarmerJul 27, 2025
  Your POLTI Vacuum Cleaner might not be producing steam because it hasn't reached the correct pressure yet, there's no water in the boiler, the Steam Disinfector and Flexible hose aren't correctly inserted, or the steam adjustment dial is set to the minimum. Wait for the steam-pressure indicator light to go off, fill the boiler as described in the preparation section of the manual, ensure the Steam Disinfector or steam gun is correctly and fully inserted, and adjust the steam adjustment dial.
E
Emily BeardJul 31, 2025
What to do if my POLTI Vacuum Cleaner doesn't turn on?
- T
  Taylor ClarkJul 31, 2025
  If your POLTI Vacuum Cleaner doesn't turn on, the power cable might not be plugged in or the boiler switch might be off. Connect the power supply cable to a suitable electric socket and turn on the boiler switch.
S
shannonhallAug 5, 2025
What to do if steam leaks from the accessories connection on my POLTI Vacuum Cleaner?
- C
  Christie Burke DVMAug 5, 2025
  If you notice steam leaking from the connection of the accessories on your POLTI Vacuum Cleaner, it's likely due to damaged or missing seals. Replace the seals to resolve this issue.
T
Terri GuzmanAug 10, 2025
How to fix a POLTI Vacuum Cleaner safety cap that is releasing steam?
- C
  Christina HallAug 10, 2025
  If a little steam is being released from the safety cap of your POLTI Vacuum Cleaner, the seal might be damaged or missing, or the safety cap isn't screwed on completely. Replace the safety-cap seal. Turn off the appliance, unplug it from the mains, and wait for it to cool before screwing the cap back on.
Y
Yvonne KingAug 15, 2025
What to do if the “Out of water” indicator light (J) is on in my POLTI CIMEX ERADICATOR?
- C
  Christian MacdonaldAug 15, 2025
  If the “Out of water” indicator light (J) is on, it means there is no water in the boiler. To resolve this, fill the boiler according to the instructions in this manual.
T
troyrobbinsAug 20, 2025
How to fix POLTI CIMEX ERADICATOR when it does not switch on?
- A
  Andrew HarperAug 20, 2025
  If your POLTI Kitchen Appliance does not switch on, first, check that it is correctly plugged into a suitable current socket. Then, make sure that you have turned the appliance on using the ON/OFF switch (B).