CIMEX ERADICATOR
19
ENGLISH
TROUBLESHOOTING
PROBLEM SOLUTION
The appliance does not
switch on
Check that the appliance is correctly plugged into a suitable
current socket.
Ensure that the appliance has been turned on using the
ON/OFF switch (B).
“Out of water” indicator
light (J) is on
There is no water in the boiler.
Fill according to the instructions given in this manual.
No HPMed consumption
during use
Check that the wick has been inserted correctly into the hole of
Steam Disinfector.
If problems persist or are not listed above, please contact our Polti Customer Services.
USA: 1-888-99-POLTI (1-888-997-6584)
Monday - Friday: 8am - 6pm EST
To Next Page
Loading...
