Why won't my POLTI Magico AG100 turn on?
If your POLTI Ultrasonic Jewelry Cleaner won't turn on, it might be due to a discharged battery. In this case, charge the battery following the instructions in chapter 1. Alternatively, check if the ON/OFF switch is turned off and turn it on.
Why does my POLTI Ultrasonic Jewelry Cleaner have a bad smell?
If you notice a bad smell during the use of your POLTI Ultrasonic Jewelry Cleaner, it is likely that the tank and/or its parts are dirty. To resolve this, wash the tank and its parts thoroughly.
What to do if water comes out of my POLTI Ultrasonic Jewelry Cleaner?
If water comes out from the openings of your POLTI Ultrasonic Jewelry Cleaner, it indicates that the tank is full. Simply empty the tank to resolve this issue.
General| Model | Magico AG100 |
|---|---|
| Type | Ultrasonic Jewelry Cleaner |
| Timer | Yes |
| Power Supply | 220-240 V |
| Cleaning Time | 480 seconds |
To Next Page
