To Next Page
T
tcrawfordAug 5, 2025
What to do if my POLTI Steam Cleaner does not produce steam?
- GGary TerryAug 5, 2025
If your POLTI Steam Cleaner isn't producing steam, first ensure the cable is properly plugged into the mains socket. Then, check if the pressure indicator light is on. Also, verify that there is water in the tank. If these steps don't resolve the issue, disconnect the appliance from the mains and wait approximately 2 hours until it cools down. After cooling, refer to the 'Use' chapter for further instructions.
General
