We can also add other modules in between such as the attenuverter that act on the control signals.
We can invert the phase or reduce the level with this as well, in case we want the same LFO to control
two different things at different amounts or phase.
The attenuverter attenuates and/or inverts a signal. It has two inputs which can be either be controlled
by the sliders or by a control input. You can attenuate / invert one control signal with another allowing
you ring mod / AM style control possibilities.
1.11. FIRMWARE UPDATE
If you have a very early Digit and currently have version 1.something (eg 1.7) rmware installed (check
in the setting menu) please contact me before updating.
For Beebo or January 2020 or later versions of Digit, please grab the packages in the ’upgrade_from_2’
folder from here and put them on a usb ash drive and click upgrade. It should be very quick. It’ll
11
To Next Page
Loading...