You can also set time in milliseconds, tap the time button and then you can type in a number if you
press the milliseconds eld, or just slide the slider to an approximate position.
The amount of milliseconds won’t follow your tap tempo, so if you have a tempo input plugged in the
times here won’t be relevant and you should use the beat setting.
1.14. IMPORT REVERBS / CABS
To import new cab or reverb IRs onto Digit, copy them onto a USB ash drive in folders called reverbs
and cabs for each. Then go to settings and tap Copy IRs. The les must be 48 kHz wavs.
1.15. IMPORT / EXPORT PRESETS
Press the oppy disk icon to get to the preset screen. Then press export preset where it’ll ask you if
you want to export the current preset or all presets.
13
To Next Page
Loading...