Polycom, Inc. 61
Polycom Kirk 6020-6040 User Guide Settings
3 Scroll to Advanced and press Select.
4 Scroll to Long key and press Select.
5 Scroll to desired definition and press Change.
Login
Before you can use the registered handset it is necessary to subscribe the
handset to a system (login). The handset can be subscribed to up to 10 different
systems. To subscribe to a system, refer to “Creating a Login” on page 62.
Selecting a Login
If you want to change to another system manually, do the following:
1 Press Menu to enter main menu.
2 Scroll to Settings and press Select.
3 Scroll to Advanced and press Select.
4 Scroll to Login and press Select.
5 Scroll to Select Login and press Select.
6 Scroll to the desired login and press Select.
Removing a Login
Logins can be removed from the system in use and from the 9 other systems (if
connected).
Note: Removing a login requires a password. Password is factory set at
0000.
1 Press Menu to enter main menu.
2 Scroll to Settings and press Select.
3 Scroll to Advanced and press Select.
4 Scroll to Login and press Select.
5 Scroll to Remove login and press Select.
6 Scroll to the desired login and press Select.
7 Enter your password and press Ok.
8 If the system in use is removed, it is necessary to select one of the
remaining systems or to subscribe to a new one.
Note: If one of the systems not chosen is removed, the handset remains
connected to the system in use.
To Next Page
Loading...
