KIRK Repeater, Installation and Configuration Guide
1–4
Figure 1-1 Repeater
KIRK Repeater LED Indicators
The repeater has one LED indicator describing the repeater operations. The
indicator is off when the repeater is not powered. The LED flashes when the
repeater initializes, and it is on when the repeater is in sync. The LED flashes
each time a connected handset is off or on hook or makes handover from or to
a repeater.
Installing the KIRK Repeater
Before beginning the installation, determine the position of the repeater for
best coverage. The coverage depends on the construction of the building,
architecture, and the choice of building materials.
To Next Page
Loading...
