Polycom RealPresence Touch User Manual

www.polycom.com
© 2015, Polycom, Inc. All rights reserved. POLYCOM® and the names and marks associated with Polycom’s products are trademarks and/or
service marks of Polycom, Inc. and are registered and/or common law marks in the United States and various other countries.
September 2015
Set Up the Polycom® RealPresence Touch
TM
Device
3
1
Set up the Polycom host system.
Polycom® RealPresence® Group Series and RealPresence Immersive Studio
TM
Systems
RealPresence Group 700
Connect to Power over Ethernet (PoE) or the
power supply.
2
3
Choose the orientation of the RealPresence Touch device.
3725-68000-001A
PoE
Optional

Polycom RealPresence Touch Specifications

General

Display	10.1-inch LCD
Resolution	1280 x 800
Connectivity	Ethernet, Wi-Fi
Power	PoE (Power over Ethernet)
Operating System	Android
Touch Technology	Capacitive
Compatibility	Polycom RealPresence Group Series
Ports	Ethernet, USB

Summary

Set Up Polycom Host System

Configure Host System

Instructions for setting up the Polycom host system.

Choose Device Orientation

Select Device Orientation

Choose the preferred orientation for the RealPresence Touch device.

Connect Power Supply

Power Connection Options

Connect the device using Power over Ethernet (PoE) or the power adapter.

Optional Power Supply Setup

Note on Included Power Supply

Information regarding the optional nature of the power supply included in the box.

Connect USB Content Cable

Optional USB Cable Connection

Connect the optional USB content cable for expanded functionality.

Pair with Polycom Host System

Follow On-Screen Pairing Instructions

Complete the setup by pairing the device with the Polycom host system.