Polygroup SUMMER WAVES User Manual

12
NOTE: NEVER step on the drain valve
7. Remove all connecting parts.
8. Be sure that the pool and all parts are completely dry before storage. Air dry the liner in the sun until it is completely dry before folding (see drawing
1
).
Sprinkle some talcum powder to prevent the vinyl from sticking together and to absorb any residual moisture.
9. Create a square shape. Starting at one side, fold one-sixth of liner into itself twice. Do the same on the opposite side (see drawings
2
&
3
).
10. Once you have created two opposing folded sides, simply fold one over the other like closing a book (see drawings
4
&
5
).
11. Fold the two long ends to the middle (see drawing
6
).
12. Fold one over the other like closing a book, and finally compact the liner (see drawing
7
).
13. Store the liner and accessories in a dry, temperature-controlled storage location above 32°F (0°C) and below 104°F (40°C).
14. The original packaging can be used for storage.
1
5 6 7
4
2 3

Polygroup SUMMER WAVES Specifications

General

Brand	Polygroup
Model	SUMMER WAVES
Category	Swimming Pool
Type	Above Ground
Filter Pump	Included
Included Accessories	Filter pump, ladder, ground cloth, pool cover