EasyManua.ls Logo

Polygroup SUMMER WAVES Series - User Manual

Polygroup SUMMER WAVES Series
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
®
TM
Trademarks used in some countries of the world under license from Polygroup
®
LIMITED (MACAO COMMERCIAL OFFSHORE).,
Unit J, 10
th
Floor, Macau Square, Av do Infante D.Henrique, No.43-53A, Macau. Tel:(853) 2875 2606 Distributed in European Union
by Germany Sales & Service Office., RMS GmbH, Besselstr.25, 68219 Mannheim. Tel:0621 8455 210 Service@rms-gruppe.de
SUMMER WAVES
®
SAND FILTER PUMP
FOR ABOVE GROUND SWIMMING POOLS
ST1100 (10”) / ST1600 (12”) models
Polygroup
®
Limited (Macao Commercial Offshore), (hereinafter “Polygroup
®
”) warrants to the original purchaser only, the Sand Filter Pump against defects in
material and workmanship for 180 days from the date of purchase. Original Purchaser must retain proof of such purchase in the form of an original store sales
receipt and must produce such upon request by Polygroup
®
or its designated agents. Warranty claims cannot be processed without a valid proof of purchase.
This Limited Warranty applies only to the original purchaser of the product and is limited solely to the repair or replacement of the product, to be decided in
Polygroup
®
’s sole discretion. Consequential damages, including claims for loss of water, pool chemicals, damage, or labor are not covered under this Limited
Warranty.
This Warranty will be declared invalid should the Purchaser modify or repair the product themselves or by unauthorized persons; use non-Polygroup
®
parts or
accessories with the product; use the product in contravention of the manufacturer’s Instructions; use improper voltage; abuse the product in any way; or through
accident or negligence. Normal wear-and-tear is not covered under this Warranty, nor are acts of God outside the control of Polygroup
®
.
IN NO EVENT SHALL Polygroup
®
, THEIR AUTHORIZED AGENTS, RELATED ENTITIES, OR EMPLOYEES BE LIABLE TO THE BUYER OR ANY OTHER
PARTY FOR DIRECT OR CONSEQUENTIAL DAMAGES. Some states or countries, or others jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
LIMITED WARRANTY
PGIM_SandFilterPump1100-1600_EU_EN_2016 12_V01
Should you encounter a problem with your Polygroup
®
Product, please do not return the product to the place of purchase. All Warranty claims must be made directly to
Polygroup
®
. Prior to contacting Customer Service, please first review the Troubleshooting Guide in the Installation Manual, or review the FAQ at www.Polygroup.com.
Please review setup instruction videos on www.Polygroup.com/video. If you are still unable to correct the problem, please contact Polygroup
®
Customer Service at
Appendix
. Have the product type and your purchase receipt ready. Our Customer Service Representative will assist you in resolving the problem. You may be asked
to return all or part of the product for inspection and/or repair. Do not return any product to Polygroup
®
without a Return Authorization number.
READ, AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
OWNER’S MANUAL

Questions and Answers

  • C
    Cynthia DawsonAug 13, 2025
    Why Polygroup SUMMER WAVES Pump motor fails to start?
    • M
      meredithcarlsonAug 13, 2025
      The Polygroup Swimming Pool Pump motor may fail to start due to several reasons: * The power cord might not be plugged into a grounded outlet or activated; ensure it is properly connected. * The line voltage could be low; it should be in the range of 105 to 125V. * The plug or circuit breaker might have tripped; reset it. If the problem continues, consult a qualified electrician to check the circuit. * The motor may be too hot, and the overload protection has shut it off; allow the motor to cool down before restarting.
  • N
    nicholsdakotaAug 17, 2025
    What to do if Polygroup SUMMER WAVES Pump doesn't work?
    • I
      ilambertAug 17, 2025
      If your Polygroup Swimming Pool Pump isn't working, consider the following: * Ensure the pool water level is adequate. * Check and clean the strainer screens at the pool inlet, as they might be clogged. * Inspect the intake hose for air leaks; tighten hose clamps and check for any damage.
  • S
    Scott AveryAug 20, 2025
    Why Polygroup SUMMER WAVES Pump sand filter doesn't pump water or flow is very slow?
    • T
      tyler75Aug 21, 2025
      If your Polygroup Swimming Pool Pump sand filter isn't pumping water or the flow is very slow, it could be due to: * Clogged inlet or discharge: Clear any obstructions in the pool outlet fitting and pump intake hose. * An air leak on the intake line: Tighten hose clamps, check hoses for damage, and verify the pool water level. * Sand media clogged with dirt: Backwash the sand bed more frequently. * Crusting or caking on the filtering sand surface: Replace about 1" (25mm) of sand. Replace all the sand if the problem persists. * Pool vacuuming device attached to the system: Remove any pool vacuuming device attached to the system line.
  • V
    Victoria NorrisAug 25, 2025
    Why Polygroup SUMMER WAVES Swimming Pool Pump sand filter doesn't clean pool?
    • D
      Donald MaddoxAug 26, 2025
      If the Polygroup Swimming Pool Pump sand filter isn't cleaning the pool effectively, consider these possible causes: * Improper chlorine or pH levels: Adjust the chlorine and pH levels. * No filtering media in the tank: Load the tank with filter sand. * Wrong 6-way valve setting position: Ensure the valve is set to the “FILTER” position. * Excessively dirty pool: Operate the filter for longer periods. * Obstructed pool outlet fitting: Clean the strainer at the pool outlet fitting to ensure proper water flow.
  • A
    Austin BakerAug 28, 2025
    How to fix Polygroup SUMMER WAVES Pump hose leaking?
    • C
      chowellAug 28, 2025
      If your Polygroup Swimming Pool Pump hose is leaking: * Ensure hose clamps are securely tightened or reinstall them. * Check that the hose connection fitting o-ring is in place and not damaged.
  • K
    Kathy VelazquezSep 1, 2025
    What causes Polygroup SUMMER WAVES Swimming Pool Pump 6-way valve/ cover leaking?
    • M
      Michael JordanSep 1, 2025
      A leaking 6-way valve or cover on your Polygroup Swimming Pool Pump can be caused by: * A missing sand tank o-ring: Remove the 6-way valve and ensure the o-ring is present. * A dirty sand tank o-ring: Clean the sand tank o-ring with garden hose water. * Loose hose clamps: Tighten the hose clamps.
  • J
    Joe GonzalesSep 5, 2025
    What to do if Polygroup Swimming Pool Pump pressure gauge doesn't work?
    • J
      James DavisSep 5, 2025
      If the pressure gauge on your Polygroup Swimming Pool Pump isn't working, clear any obstructions in the intake by unscrewing it from the 6-port valve.
  • P
    Paula WalkerSep 8, 2025
    Why is sand flowing back into the pool from my Polygroup SUMMER WAVES Swimming Pool Pump?
    • H
      hallbrianSep 9, 2025
      Sand flowing back into the pool from your Polygroup Swimming Pool Pump can occur if: * The sand is too small: Use only No.20 silica sand with a particle size range of 0.45 to 0.85mm (0.018 to 0.033 inches) and a Uniformity Coefficient less than 1.75. * The sand bed is calcified: Discard all the used sand and replace it with new sand.

Summary

Limited Warranty

Important Safety Instructions

Safety Care for Children

Guidelines for supervising children around the pool to prevent drowning and ensure safety.

Swimming Pool Barriers

Discusses the importance of pool barriers and compliance with local laws for child safety.

Swimming Pool Equipment Safety

Advice on keeping electrical equipment away from the pool area.

Filter Pump Awareness

Key warnings and precautions for installing and using the filter pump.

Entrapment and Drowning Risks

Precautions to avoid entrapment with fittings and prevent drowning, focusing on supervision.

Electrocution and First Aid

Safety guidelines to prevent electric shock and essential first aid steps for emergencies.

Special and Extra Safety Warnings

Additional safety advice on building codes, weather, supervision, and electrical grounding.

Installation Recommendations

Recommendations for pool site preparation, cleaning, and maintenance checks.

Sand Pump Power Information

Parts List

Setup Instructions

Pool Setup and Preparation

Follow pool instructions, locate openings, and prepare the site before filling.

Pump and Tank Assembly

Assemble the pump onto the base and place the sand tank securely.

Sand Filling and Guard Attachment

Fill the sand tank with sand and attach the sand guard to the center pipe.

6-Port Valve Installation

Install the 6-port valve, ensuring proper alignment, seal, and secure clamping.

Hose Connections

Connect the short and long hoses between the pump, valve, and pool securely.

Operating Instructions

Functions of the 6-Port Valve

Details the different valve positions (Backwash, Rinse, Filter, Waste, etc.) and their functions.

Hose Connections and Valve Operation

Ensure secure hose connections and proper valve handle operation before switching positions.

Backwash and Filter Procedures

Steps for backwashing the sand bed and operating the filter for normal use.

Pump Motor Protection

Pump Maintenance

Pool Water Care

Troubleshooting Guide

Pump Motor and Filter Issues

Resolving problems with pump startup, filter cleaning, and low water flow.

Leak and Gauge Problems

Diagnosing and fixing leaks in the valve, hoses, and issues with the pressure gauge.

Sand Return and Maintenance Issues

Addressing sand returning to the pool and calcification of the sand bed.

Replacement Parts Ordering Information

Winterising, Disassembly & Storage

Customer Services Contact

Polygroup SUMMER WAVES Series Specifications

General IconGeneral
BrandPolygroup
SeriesSUMMER WAVES
CategorySwimming Pool
Frame MaterialSteel
TypeAbove Ground
ShapeRound
MaterialPVC
Included ComponentsPool, Filter Pump, Ladder, Ground Cloth, Pool Cover

Related product manuals