What to do if the Salt Status Indicator turns red on my Polygroup SUMMER WAVES P5E000400 Lighting Equipment?
If the Salt Status Indicator is red on your Polygroup Lighting Equipment, it means the salt level is low. Add salt to the water until the light turns green.
Why my Polygroup Lighting Equipment system doesn’t start?
If your Polygroup Lighting Equipment system doesn’t start, ensure it's plugged into a grounded power outlet. Also, check if the GFCI power cord or circuit breaker has tripped and reset it. If the issue continues, have the circuit checked by a qualified electrician. Confirm the line voltage is between 105VAC and 125VAC. If the LED blinks every 5 seconds in STANDBY mode, press and HOLD the Power/Mode Button for at least 2 seconds.
What to do if the Salt Status Indicator turns orange on my Polygroup SUMMER WAVES P5E000400 Lighting Equipment?
If the Salt Status Indicator is orange on your Polygroup Lighting Equipment, it indicates a high salt level. To fix this, drain some pool water and refill with fresh water until the indicator light turns green.
What to do if my Polygroup Lighting Equipment is not working?
If your Polygroup Lighting Equipment isn't working, first, ensure the cord connectors at the Electrolytic Cell are tightened and the Cell Cover and Cell Lock Nut are firmly connected. If the red LED of the Water Flow Sensor is on, clean the Sensor or replace the Electrolytic Cell. Also, check if the Electrolytic Cell or Cell Inlet is dirty and clean them. If the Timer Indicators are off, press and HOLD the Power/Mode Button for at least 2 seconds.
What does it mean when the Cell Status Indicator turns orange on my Polygroup SUMMER WAVES P5E000400 Lighting Equipment?
If the Cell Status Indicator turns orange on your Polygroup Lighting Equipment, it means the Electrolytic Cell is in poor condition. Hose clean the Cell. If the LED remains orange, replace it immediately.
What does it mean when the Cell Status Indicator turns red on my Polygroup SUMMER WAVES P5E000400?
If the Cell Status Indicator turns red on your Polygroup Lighting Equipment, it indicates an Electrolytic Cell failure. Replace it with a new Cell immediately.
How to fix water leakage at Cell Inlet in Polygroup Lighting Equipment?
Check that the Metal Hose Clamp is properly tightened to resolve water leakage at the Cell Inlet of your Polygroup Lighting Equipment. Inspect the O-Ring for damage and replace it if needed. Also, check the hose between the Cell and filter pump for cracks or holes, and replace the hose if necessary.
How to fix water leakage at Cell Outlet or Hose in Polygroup Lighting Equipment?
Check that the Plastic Hose Clamp is properly tightened to resolve water leakage at the Cell Outlet or Hose of your Polygroup Lighting Equipment. Inspect the O-Ring for damage and replace if needed. Also, check the Hose for cracks or holes and replace it if necessary.
How to fix water leakage at Cell Lock Nut in Polygroup SUMMER WAVES P5E000400 Lighting Equipment?
To address water leakage at the Cell Lock Nut of your Polygroup Lighting Equipment, ensure that the Nut is tightened properly to seal the connection between the Cell Case and Cell Cover.
How to fix water leakage at Cell O-Rings in Polygroup SUMMER WAVES P5E000400 Lighting Equipment?
To fix water leakage at the Cell O-Rings of your Polygroup Lighting Equipment, check for damage and replace as needed. Lubricate the O-Rings with petroleum jelly.
Supervision guidelines for children's safety around pools.
Requirements and recommendations for pool safety barriers.
Safety considerations for pool equipment installation and use.
Additional safety precautions and guidelines for users.
Technical specifications of the salt water system components.
Detailed procedures for connecting the system to the pool and pump.
Recommended amount of cyanuric acid for pool stabilization.
Step-by-step instructions for replacing the electrolytic cell unit.
General| Brand | Polygroup |
|---|---|
| Model | SUMMER WAVES P5E000400 |
| Category | Lighting Equipment |
| Language | English |
To Next Page
