Polygroup SUMMER WAVES P5E000400 - Timer Button (-); Salt Status Indicator; Cell Status Indicator

OWNER’S MANUAL
13
Button Function/Action LED Light Indication Image
Green
Cell Status Indicator
6
Salt Status Indicator
5
The LED light of the
Water Flow Sensor
d
Orange
Red
POWER /MODE
TIMER
(HOURS)
10
8
6
4
2
CELL STATUS
SALT LEVEL
WATER FLOW
Green
Orange
Red
Green
Red
Electrolytic Cell
s
in good condition
Electrolytic Cell
s
in poor condition
Electrolytic Cell
s
is not functioning.
Needs to replace with a new Cell.
Salt level is normal (between
2500 ppm and 4500 ppm)
Salt level is too high (above 4500 ppm).
Remove salt as per the instructions
“How to reduce salt” on p. 14.
Salt level is too low (below 2500 ppm).
Add more salt as per the instructions
“How to add salt” on p. 14.
Water flow rate is normal
No water flow. Check your filter pump.
If the filter pump is working, clean the
water flow sensor of the Electrolytic
Cell
s
(see CLEANING THE WATER
FLOW SENSOR, p. 17).
POWER /MODE
TIMER
(HOURS)
10
8
6
4
2
CELL STATUS
SALT LEVEL
WATER FLOW
POWER /MODE
TIMER
(HOURS)
10
8
6
4
2
CELL STATUS
SALT LEVEL
WATER FLOW
POWER /MODE
TIMER
(HOURS)
10
8
6
4
2
CELL STATUS
SALT LEVEL
WATER FLOW
POWER /MODE
TIMER
(HOURS)
10
8
6
4
2
CELL STATUS
SALT LEVEL
WATER FLOW
In BOOST mode, each press will
add 2 hours of operating time.
In BOOST mode, each press will
reduce 2 hours of operating time.
Timer Button (+)
1
Timer Button (-)
3
Timer Indicators
2
will add up and
show how many hours left.
Timer Indicators
2
will decrease
down and show how many hours
left.