To Next Page
J
Jasmine NavarroAug 10, 2025
Why is my PolyScience Laboratory Equipment not heating?
- JJason BassAug 10, 2025
There are several reasons why your PolyScience Laboratory Equipment might not be heating: * The set point might be lower than the bath temperature. In this case, check the set point temperature and increase it as needed. * The bath temperature might be above the High Limit temperature. Verify that the High Limit temperature is higher than the current set point temperature and adjust it if necessary. * The liquid level in the bath might be too low. Check that the liquid level is at least 2 inches (5.08 cm) above the bottom of the tank, and add fluid if required.
General
