CARE AND HANDLING
Your POM Gear device is a pre-
cision-engineered instrument. To
ensure its continuous optimal perfor-
mance, you should look after it as you
would any quality consumer electron-
ic product, and use it in accordance
with the following instructions.
We recommend:
1. Avoid leaving your device in direct
sunlight or any area where tempera-
ture may exceed 60 degrees Celsius
or 140 degrees Fahrenheit. Remem-
ber that on a hot day the temperature
inside a closed car may be significant-
ly high than the outside air temperature.
Next
2. Do not leave your device in any
area exposed to humidity, dust, soot,
smoke, or steam or other foreign
objects, as this may cause your device
to malfunction.
3. Do not use any household or in-
dustrial grade detergents or cleaners
to clean your device. If your device
becomes dirty, in most instances a
wipe with a dry or slightly damp cloth
should be sufficient enough to clean
it without damaging it.
4. Do not leave your device plugged
into a wall or car charger for long pe-
riods of time after it is fully charged.
Many negative affects can be the
result of over charging.
Previous
To Next Page
Loading...
