EasyManua.ls Logo

Pondmaster ProLine Pro1000 - Maintenance and Winter Care; Filter Media Maintenance; Winterizing Procedures; Replacement Parts Availability

Pondmaster ProLine Pro1000
6 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE
The Pro Series Waterfalls require no maintenance other than periodically changing or refreshing the filter media in the models
that include media.
FOR MODELS THAT INCLUDE FILTER MEDIA
The Pro Series Waterfalls is a biological filter; it depends on an active colony of aerobic or oxygenating bacteria to remove
ammonia from the water column. The colony will need 4 to 6 weeks to grow initially. After the bacteria have colonized the
media, avoid rinsing the media in chlorinated water. Typical household tap water contains enough chlorine to wipe out the
helpful bacterial colonies. Instead, clean the media by immersing the bag of media in bucket or small tub filled with pond water
and briskly shaking to break up and remove some - but not all - of the sludge that builds up. This is typically necessary once at
the end of the season. Note that the dirty water resulting from cleaning the filter media is good fertilizer for most outdoor
plants.
DEBRIS FILTER PADS
The filter pads provided in the 02479, 02469, and 02482 Kits work as debris filters and to a lesser extent a biological filter. The
procedure above on how to clean the bagged filter media also applies to the debris filter pads. Note that depending on your
particular pond conditions, cleaning may be needed more frequently. The Debris filter pad (Item # 12453 for Pro 1000, Item #
12457 for Pro 2000, and Item #12459 for Pro 3000) can be replaced as needed.
WINTERIZING
The Pro Series Waterfalls can withstand winter conditions unless you live where winters are extremely harsh. If the falls are
turned off during the winter months, be sure to empty the falls and any tubing that is above ground since standing water will
form ice that can split valves and rigid fittings.
6
DANNER MFG. INC. 160 Oval Drive, Islandia, NY 11749-1489 (631) 234-5261
Visit our website at www.Dannermfg.com
LIMITED ONE YEAR WARRANTY
E.G.Danner Manufacturing, Inc will repair or replace any Pro Series Waterfalls found to be defective within one year
of original purchase. Wearable items are not covered by this warranty. For warranty repair, return only the part that
is defective to our factory. Please include a dated proof of purchase and $10.00 for postage and handling. Damages
or injuries resulting from negligence or misuse of the product are not covered by this warranty. This warranty gives
you specific legal rights. You may have other rights which vary from state to state.
ZG105 revD 5/15
2
5
1
4
3
REPLACEMENT PARTS
or
or
6
7
8
or
9
10
or
11
or
PART DESCRIPTION
3000 Waterfall Box
2000 Waterfall Box
1000 Waterfall Box
Bulkhead Fitting #12470
2” X 2” MPT Barbed Fitting #12488
Stepped Barb/Diverter #12482
BioMatrix Media Bag #12445
BioMatrix Media Bag #12455
Debris Filter Pad #12453
Debris Filter Pad #12457
Debris Filter Pad #12459
1
2
3
4
5
6
7
8
9
10
11
”s designate parts
included with each model
Model 3000Model 2000Model 1000
#02467
#02468
#02469
#02477
#02478
#02479
#02480
#02481
#02482
{

Related product manuals