Ponovo PW336i - User Manual

PW336i Hardware User Manual
1
PONOVO POWER CO., LTD
No. 139 Jinghai Third Road, BDA, Beijing, China, 100176
Office
TEL. +86 (10) 59089666
E-Mail
Info@relaytest.com
Website
www.relaytest.com / www.ponovo.com.cn
PW336i
HARDWARE USER MANUAL
VERSION: PW336i-AE-3.30
DATE : JUNE 2018
This manual is the publisher of PONOVO POWER CO., LTD. To make any kind of copy of this
manual please contact PONOVO POWER CO., LTD in advance.
This manual represents the technical status for the moment of publishing. The product information,
description and specifications mentioned in the manual do not have any contact binding force and
PONOVO POWER CO., LTD remains the right to make modifications to the technical
specifications and configurations without prior notice. PONOVO POWER does not take
responsibility to the possible error/mistakes in this manual.

Summary

Safety Precaution

Operation Preparation

Connecting PC to PW336 i

Steps and diagram for connecting the PC to the PW336i via Ethernet cable.

General Description of PW336 i

Front Panel Overview

Ethernet Port Usage

Rear Panel Connections

IP Reset Functionality

Explains how to reset the IP address to default factory settings.

Hardware Configuration

Current Generators Configuration

Details the configuration of the PW336i's 6 current generators in 3 or 6 current modes.

Current Output Configuration in 3 Current Mode

Binary Inputs and Outputs

Binary Input Specifications

Details the electrical characteristics, impedance, and settings of binary inputs.

Binary Configuration Interface

Describes the software interface for configuring binary inputs.

Binary Outputs

Describes the PW336i's 4 binary outputs and their type.

Getting Ready for PC Controlled Operation

PC Control Overview

Explains PC control via Ethernet and required software.

Default IP Address Setting

States the default IP address of the PW336i unit.

Steps for Setting PC IP Address

Provides step-by-step instructions for setting the PC's IP address.

Troubleshooting Common Issues

Power Indicator Issues

Checks and potential causes for a non-functional power indicator.

Voltage Short Circuit or Overheat Alarm

Diagnosing and resolving voltage short circuit or overheat alarms.

Cannot Connect to Computer

Steps to diagnose and resolve issues preventing PC connection.

Current and Voltage Output Inaccuracy

Troubleshooting steps for inaccurate current and voltage output.

High Current Output Inaccuracy

High Voltage Output Inaccuracy

Output Waveform Incorrect

Phase Measurement Inaccuracy

Frequency Measurement Inaccuracy

Binary Inputs and Outputs Troubleshooting

Open Circuit Current Alarm

Ponovo PW336i Specifications

General

Power Measurement	Yes
Harmonic Measurement	Yes
DC Current Output	± 10 A
Binary Inputs	8
Binary Outputs	4
Current Measurement Range	0 - 35 A
Frequency Measurement Range	20~1000Hz
Data Storage	Internal memory
Communication Interface	Ethernet