Ponovo PW636i User Manual

PW636i Hardware Instruction Manual
1
PONOVO POWER CO., LTD
2F, 4Cell, Tower C, In.Do Mansion
No.48A Zhichun Road, Haidian District
Beijing, China (Post Code 100098)
Office
TEL. +86 (10) 82755151 ext. 8887
FAX +86 (10) 82755257
E-Mail Info@ponovo.com.cn
Website www.ponovo.com.cn
PW636 i
HARDWARE INSTRUCTION MANUAL
VERSION: PW636i-AE-2.03
DATE : 21/09/2011
This manual is the publisher of PONOVO POWER CO., LTD. To make any kind of copy of this
manual please contact PONOVO POWER CO., LTD in advance.
This manual represents the technical status for the moment of publishing. The product information,
description and specifications mentioned in the manual do not have any contact binding force and
PONOVO POWER CO., LTD remains the right to make modifications to the technical
specifications and configurations without prior notice. PONOVO POWER does not take
responsibility to the possible error/mistakes in this manual.

Ponovo PW636i Specifications

General

Brand	Ponovo
Model	PW636i
Category	Test Equipment
Language	English

Summary

1. Preface

Technical specifications

Provides a description of the technical specifications for the device.

2. Safety precaution

3. Designed applications

Product features

Details the key features and capabilities of the PW636i test equipment.

4. Operation preparation

Preparation

Ensures all necessary preparation and system components are ready before operation.

Connecting PC

Provides step-by-step instructions and diagrams for connecting the PC to the PW636i.

5. General description

Front panel

Details the components and functions of the PW636i's front panel interfaces.

Ethernet port

LED Indication

Rear panel

Details the components and connectors located on the rear panel of the PW636i.

IP reset

Describes the function and procedure for resetting the PW636i's IP address.

6. Hardware configuration

Current generators

Explains the 6 current generators and their configuration modes (3 or 6 current).

Current in series connection in 3 current mode

Explains connecting two current generators in series for increased compliance voltage.

Voltage generators

Details the 4 voltage generators available in the PW636i.

Connect two voltage generators in series

Explains connecting two voltage generators in series for a higher output voltage range.

7. Binary inputs and outputs

General description

Binary Input Details

Covers polarity, isolation, software configuration, and threshold settings for binary inputs.

Binary outputs

8. Getting ready for PC controlled operation

General description

Explains PC control via Ethernet and the requirement for PowerTest software.

Set IP address

States the fixed IP address of the PW636i and its subnet mask for factory setting.

Steps for setting IP address in PC

Guides on how to set the computer's IP address for communication with the PW636i.

Check if IP is set properly

10. Specifications

Voltage Generators

Lists setting range, power, accuracy, resolution, and distortion for voltage generators.

Current Generators

Lists setting range, power, accuracy, resolution, and distortion for current generators.

Generator, general

Binary Input & Output

DC voltage measuring inputs

DC current measuring inputs

Power supply

Specifies nominal and permissible input voltage and frequency for the power supply.