6-18
3. Then squeeze the tab on the left of the inner access
panel to open the door.
4. The first air filter will pull straight out. To remove
the second, reach in and slide it toward the opening.
Pull the second filter out.
5. Replace the filters by reversing Step 4. Make sure
the filters are inserted so that the sealing foam is
angled in the same direction on both filters.
For the type of filter to use, see “Normal
Maintenance Replacement Parts” in the Index.
6. Close the inner access door, while squeezing the tab.
Be sure it is tightly closed.
7. Snap the outer access panel into the back of the
glove box.
To Next Page
Loading...
Need help?
General
