1-40
Center Passenger Position
Lap-Shoulder Belt
If your vehicle has a bench seat, someone can sit in the
center position.
When you sit in the center seating position, you have a
lap safety belt, which has no retractor. You also have a
shoulder belt, which has a retractor. In order to have the
protection of the shoulder belt, you must first connect it
to the lap belt.
Remove the shoulder belt from its stowage location in
the roof and pull it all the way down to the lap belt.
Insert the metal knob on the shoulder belt into the
keyhole on the lap belt buckle as shown. Be sure to
slide the shoulder belt part into the keyhole until it locks
into place.
To Next Page
Loading...
