Hood Release
To open the hood, do the following:
1. Pull the release
handle with this symbol
on it. It is located
below the instrument
panel to the left of
the steering wheel.
2. Then go to the front of the vehicle and pull up on
the secondary hood release. The lever is located
near the middle of the hood.
3. Lift the hood.
4. Release the hood prop rod from its retainer and put
it into the slot in the hood. To insert the hood prop
rod into the slot, move it straight up. If it is
moved to the side or toward the inside of the
vehicle, it may become detached.
Before closing the hood, be sure all the filler caps are
on properly. Make sure to return the hood prop rod
carefully back to its retainer to avoid damaging
the vehicle.
5-11
To Next Page
Loading...
