Need help?Do you have a question about the Pool Technologie Pro Dosing Ampero and is the answer not in the manual?
General| Brand | Pool Technologie |
|---|---|
| Model | Pro Dosing Ampero |
| Category | Controller |
| Language | English |
Guide for initial setup and programming of the electronics unit.
Explanation of LED colors and their meanings for status indication.
Overview of screen displays and their possible meanings.
Explanation of the function of each key on the control panel.
Diagram illustrating the navigation flow through the device menus.
Procedure for manual priming and injection of chlorine.
How to turn chlorine dosing on or off.
Procedure to set the desired chlorine concentration level.
Steps to calibrate the sensor for measuring chlorine levels.
Process to record the date of electrolyte gel replacement.
Setting up reminders for electrolyte gel maintenance.
Adjusting the range for proportional chlorine injection control.
Defining the time intervals for chlorine injection cycles.
Configuring upper and lower alarm limits for chlorine levels.
Setting a delay before chlorine regulation starts after power-up or flow restoration.
Procedure for manual priming and injection of pH corrector.
How to turn pH regulation on or off.
Steps to calibrate the pH measurement.
Detailed instructions for calibrating the pH probe.
Procedure to set the desired pH level.
Defining whether to use an acid or basic corrector.
Adjusting the range for proportional pH corrector injection control.
Defining the time intervals for pH corrector injection cycles.
Configuring upper and lower alarm limits for pH levels.
How to configure the device's internal date and time.
Choosing the user interface language.
Configuration options for connected sensors.
Procedure to restore device settings to factory defaults.
Configuration and usage of Bluetooth connectivity.
Overview of system alarms, alerts, and their dismissal.
To Next Page