Poolcandy SPLASH RUNNER - User Manual

INSTRUCTION MANUAL
INFLATION
•
Congratulations on your purchase of the Splash Runner® Motorized Pool Lounger from
PoolCandy. You and your friends will enjoy hours of outdoor fun with this innovative
product. Your Splash Runner features two propellers which enable you to drive and turn in
all directions!
The Splash Runner is easy to use, but be sure to use it safely. Before starting, please read this
manual thoroughly, especially noting the safety and care. Keep this manual for reference.
Your Splash Runner requires some assembly. This package includes one pool lounger. For
each side of the pool lounger, it includes a battery case, a battery cover and handle, a
control arm sleeve, and a motor assembly that encloses the propeller. Your Splash Runner
also includes a repair kit, and this instruction manual.
For easy to follow video
instructions, go to
www.poolcandy.net/pages/support
and click on Support or scan
the QR code below:
Your Splash Runner has three separate air chambers to inflate. The nozzles for the air chambers are located on the underside of
the back rest, behind the headrest, and at the bottom of the lounger near the feet. The Splash Runner can be inflated by mouth,
with a foot pump, or with an electric pump.
To inflate the Splash Runner with an electric pump, insert the pump nozzle into the air valve. The valves include a flap to prevent
air from flowing back out of the chamber, so make sure to push the pump nozzle past the flap, to ensure that air flows freely. Be
careful not to over-inflate.
Be sure to securely close each valve cover after completing each section.
SPLASHRUNNER
MOTORIZED LUXURY POOL LOUNGER
ASSEMBLY
Step 1.
Once the lounger has been inflated, repeat the following steps on both sides of your Motorized Pool Lounger. Be sure to
assemble it on a raised surface to prevent the motor assembly from being damaged.
Insert the control arm sleeves into the openings
in the armrest on the inflatable. Be sure to push
the sleeve in until the top area is level with the
top of the inflated armrest.
Step 2.
Slide the battery assembly into the control arm
sleeve. Be careful not to damage the wire inside the
battery assembly when sliding it into the sleeve.
Please read the User's Guide carefully before operating the product.
• Children under 14 years of age should not operate this product without parental supervision.
• This product is designed for pool and lake use only. It may be used in ponds or small lakes only within the range of the user’s
comfortable ability to swim to shore. Do not use in areas where there are strong currents, waves, or watercraft present which could
create wakes. Do not use in any other body of water or salt water.
• This product is designed to hold one person not exceeding 300 lbs/135 kg.
• Keep hands, hair, and loose objects such as clothing away from the propeller.
• If an object becomes lodged in the propeller, make sure that this product is turned o before attempting to dislodge.
• Always inspect the pool area before use to ensure it is free of hazards and/or obstacles, such as pool toys and swimmers.
• Never ride into or over swimmers.
• Keep this product away from hot or sharp objects.
• Always use caution and common sense.
• Never jump or dive o this product.
WARNING
• Avoid rough handling such as bumping or dropping.
• Avoid extreme temperatures. For best results use between the temperatures of 39° F and 120° F (4° C and 38° C).
• Clean using only a slightly damp cloth. Do not use cleaners with chemical agents.
SPECIAL CARE & HANDLING
• Your Motorized Pool Lounger uses 12 D batteries (6
per propeller), not included.
• Do not mix alkaline, standard (carbon-zinc) or
rechargeable nickel-cadmium) batteries.
• Do not mix old and new batteries.
• Do not use rechargeable batteries.
• Remove exhausted batteries from the unit.
• Do not short circuit battery terminals.
• Remove batteries and store them in a cool, dry place
when not in use.
• To avoid explosion or leakage, do not dispose of
batteries in a fire or attempt to recharge alkaline or
other non-rechargeable batteries.
BATTERY INFORMATION
If you have any questions or would like additional
information on PoolCandy products, please contact
us at service@banddgroup.com.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
THE MOTORIZED POOL LOUNGER IS NEITHER A
PERSONAL-FLOTATION NOR A LIFESAVING DEVICE.
ALL USERS SHOULD KNOW HOW TO SWIM.
@PoolCandy
www.PoolCandy.net
CONTENTS:
•ONE INFLATABLE POOL LOUNGER
• 2 x BATTERY-OPERATED MOTORS
• PATCH KIT
• INSTRUCTION MANUAL
Model No. PC4000SR

Summary

Safety Warnings and Precautions

General Safety Instructions

Essential safety guidelines for operating the motorized pool lounger, including age restrictions and water usage.

Care and Handling

Cleaning and Temperature Guidelines

Instructions on how to clean the product and recommended temperature ranges for optimal use and storage.

Battery Information

Battery Usage and Management

Details on battery type, installation, mixing, and maintenance for the motorized pool lounger.

Product Inflation

Inflation Process

Guidance on inflating the three air chambers of the lounger using various pump types.

Product Assembly

Initial Assembly Steps

Instructions for attaching the control arm sleeves and battery assembly to the inflatable lounger.

Battery and Propeller Connection

Steps for inserting batteries, connecting wires, and securing the propeller assembly.

Operation and Control

Controlling the Splash Runner

How to maneuver the motorized pool lounger in various directions using the handle controls.

Disassembly and Repair

Disassembly Instructions

Steps to safely take apart the motorized pool lounger for storage or maintenance.

Repairing Punctures

Procedure for patching holes or punctures in the lounger using the provided repair kit.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The PoolCandy SplashRunner Motorized Luxury Pool Lounger is an inflatable device designed for recreational use in pools and small lakes, allowing users to propel and steer themselves through the water. It is not a personal flotation or lifesaving device, and users should know how to swim.

Function Description:

The SplashRunner is a motorized pool lounger that allows a single user to drive and turn in all directions using two integrated propellers. It features two battery-operated motors, each controlled by a handle with buttons. The lounger is inflatable and designed for comfort while providing propulsion.

Important Technical Specifications:

• Weight Capacity: Designed to hold one person, not exceeding 300 lbs (135 kg).
• Power Source: Each propeller requires 6 D-cell batteries (12 D-cell batteries total for the device), which are not included.
• Operating Temperature: For best results, use between 39° F and 120° F (4° C and 38° C).
• Inflation: The lounger has three separate air chambers for inflation, located on the underside of the backrest, behind the headrest, and at the bottom near the feet. It can be inflated by mouth, foot pump, or electric pump. Valves include a flap to prevent air from flowing back out.
• FCC Compliance: The device complies with Part 15 of the FCC Rules, indicating it is subject to the following two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. It has been tested and found to comply with the limits for a Class B digital device.

Usage Features:

• Steering and Propulsion:
  • Forward: Turn both handles forward and press both buttons.
  • Reverse: Turn both handles backward and press both buttons.
  • Turning (Right/Left): Turn either handle to the right or left. The angle of the turn depends on how much the handles are turned.
  • Lateral Movement (Right/Left): Turn both handles right or left and press both buttons.
  • Rotation: Face one propeller forward and the other backward and press the buttons.
• Assembly:
  1. Inflate the lounger, being careful not to over-inflate.
  2. Insert the control arm sleeves into the openings in the armrest until the top area is level with the armrest.
  3. Slide the battery assembly into the control arm sleeve, being careful not to damage internal wires.
  4. Unscrew the cap from the battery assembly to open the compartment. Insert 6 D-cell batteries, ensuring correct polarity. Replace the cover and secure it by pressing down and tightening clockwise, aligning notches.
  5. Connect the wires from the battery compartment to the propeller assembly by inserting the male power plug into the female outlet.
  6. Align the tabs on the propeller assembly with the openings in the downrod of the battery compartment. Slide the top stem into the downrod and squeeze the tabs to fully insert until it "clicks" into place.
  7. Repeat these steps for the other side of the raft.
  8. Test the propeller by pressing the button on the handle. If it doesn't move, check electrical connections and battery cover alignment.
• Disassembly:
  1. Unscrew the cap from the battery compartment, remove the cover, and remove all batteries. Immediately replace the cover and cap to avoid losing them.
  2. Separate the propeller from the battery compartment assembly by squeezing the tabs and pulling the propeller down. Avoid pulling too fast or far to prevent damage to electrical wires.
  3. Separate the electrical connection between the propeller and the wires from the battery compartment by pressing the small tab on the male plug and pulling it away from the female connection. Always pull the plastic plugs, not the wires themselves, to prevent damage.
• Safety Precautions:
  • Not for children under 14 without parental supervision.
  • For pool and small lake use only, within comfortable swimming distance to shore.
  • Do not use in areas with strong currents, waves, or watercraft.
  • Not for use in other bodies of water or salt water.
  • Keep hands, hair, and loose objects away from the propeller.
  • If an object lodges in the propeller, turn off the device before attempting to dislodge.
  • Inspect the pool area for hazards before use.
  • Keep away from hot or sharp objects.
  • Always use caution and common sense; never jump or dive off.
  • Do not mix alkaline, standard (carbon-zinc), or rechargeable nickel-cadmium batteries.
  • Do not mix old and new batteries.
  • Do not use rechargeable batteries.
  • Remove exhausted batteries; do not short circuit battery terminals.
  • Do not dispose of batteries in fire or attempt to recharge non-rechargeable batteries.
  • This is not a lifesaving device; do not leave a child unattended while in use.

Maintenance Features:

• Cleaning: Clean using only a slightly damp cloth. Do not use cleaners with chemical agents.
• Storage: Remove batteries and store them in a cool, dry place when not in use.
• Repairing Punctures: If the lounger gets punctured, use the included repair kit (glue and PVC sheet). Apply glue to the damaged area, then apply the PVC sheet. Wait approximately one minute for the glue to dry before handling, and 24 hours before using the SplashRunner in water again.
• Handling: Avoid rough handling (bumping or dropping). Avoid extreme temperatures.

Poolcandy SPLASH RUNNER Specifications

General

Brand	Poolcandy
Model	SPLASH RUNNER
Category	Lighting Equipment
Language	English