Poolguard PGRM - 2 - POOLGUARD REMOTE RECEIVER

POOLGUARD REMOTE RECEIVER
The POOLGUARD REMOTE RECEIVER has been integrated with the
standard POOLGUARD unit to provide a wireless remote alert operating at
distances of up to 200 feet.The POOLGUARD REMOTE RECEIVER
sounds an alarm in the house when the POOLGUARD unit is activated at
the pool.The remote system consists of the following functional elements:
•A coded pulse receiver (Remote Receiver), (See Figure 6).
•A standard wall outlet power supply, (See Figure 6).
The REMOTE RECEIVER is a compact unit powered by a UL and CSA
approved AC/DC power supply. The REMOTE RECEIVER can be placed
on a table or a counter top inside the house. The pulse coded radio
frequency signal is transmitted from the pool unit and is received and
decoded to sound the remote receiver. The remote receiver will sound
for an additional 3 seconds after the pool unit has been silenced. If
the REMOTE RECEIVER beeps once approximately every 10 seconds,
it is indicating that the 9v battery in the pool unit is low and needs to
be replaced. After you have purchased your POOLGUARD alarm and you
wish to add another remote receiver to your alarm system you can acquire
one from PBM Industries, Inc. Contact PBM by phone or mail or contact
your place of purchase.
POWER SUPPLY—-• ^ft^-*^^^ ^85dB Horn at 10 feet
REMOTE RECEIVER
FIGURE 6