Why is my PoolMaster Heater not heating the pool?
If your PoolMaster Solar Heater isn't heating the pool, ensure water is flowing through it by checking the flow at the pool return. For optimal heating, the heater needs full sun exposure for about 10 hours daily. Using a solar or pool cover at night can help minimize heat loss. Also, consider that your pool size might need more Solar Heaters.
What to do if PoolMaster 59026 leaks?
If your PoolMaster Solar Heater is leaking, check that all connectors and hose clamps are tightened properly and are not defective.
How to stop bubbles appearing from the PoolMaster 59026 Heater water inlet?
If bubbles keep appearing from the water inlet of your PoolMaster Heater during operation, check all connections for leaks. Also, inspect the flow rate and examine the tubing for any leaks or clogging.
Solar Heater designed for ground installation next to pump/filter. Ensure no child access.
Read manual carefully. Failure to comply can cause injury, death, or damage. Do not allow children to operate.
Place on hard, level surface, in direct sunlight, angled towards sun. Never on roof.
Works best when the sun is shining.
General| Brand | PoolMaster |
|---|---|
| Model | 59026 |
| Category | Heater |
| Language | English |
To Next Page