4
Parts Included:
All you will need is a flathead screwdriver or 5/16
th
- inch driver for your assembly.
Reference Description QTY
A Solar Heater 1
B 1½” x 6’ 6” Flex hose (hose can be cut at mid point to make two 1½” x 3’ 3” hoses) 1
C Transparent Cover (this will be pre-installed on the solar heater) 1
D Adjustable Aluminum Legs 2
E 1½” Stainless Steel Clamps 2
F O-rings 2
G Hose Adaptors 2
H 1½” PVC Couplings 2
1. Remove Solar Heater from the box. Note IN (left
side) and OUT (right side) markings on the bottom of
the Solar Heater.
To Next Page
Loading...